POR-15 POR 15 Metal Prep Ready Quart

Description

POR-15
®
Metal Prep
provides the best adhesion for POR-15
®
Rust Preventive Coating on any metal surface, including aluminum and shiny polished metal surfaces. Our simple process gently etches metal, creating an ideal anchor pattern for coatings such as POR-15
®
Rust Preventive Coating, while simultaneously leaving a zinc phosphate coating to insure chemical bonding of paint and steel. Avoid other preps that may leave harmful residues which prevent proper adhesion. After thoroughly degreasing your work piece, apply environmentally safe
POR-15 Metal Prep
to both neutralize any rust and etch any clean bare metal. This will allow better adhesion of POR-15
®
Rust Preventive Coating or any other coating.
POR-15
®
Metal Prep
is not caustic, corrosive, toxic or flammable.
POR-15
®
Metal Prep Features:
Interesting Facts you should know about steel and prepping it before you coat it with
POR-15
: In every car manufacturing facility, steel in different parts of the car body often comes from different steel mills and different production lots, and the surface texture varies with the condition of the steel mill rolls which cold roll the steel to its final thickness. Also, surface cleanliness varies with the mills cleaning procedures, especially the procedures used to control carbon smut is actually baked onto the steel during the high temperature annealing process which follows rolling. This carbon smut is impossible to remove except by mechanical abrasion. Rust varies with the care taken in handling (1) at the steel mill, (2) during transportation and storage, and (3) during fabrication. Steel stored for a long time with rust inhibiting oil will react to form an incomplete oxide known as oil stain.
The result of all this is that ordinary steel varies widely in the manner in which it accepts coatings.
Although some commercial steel provides an excellent surface for coatings, you are just as likely to find steel which gives poor adhesion and poor rust resistance, even with good coatings. Often the same mill will produce both very good and very poor surface quality, depending upon a number of uncontrolled factors. Nearly all the above problems can be overcome by using
POR-15
®
Metal Prep
before you coat your steel.
POR-15
®
Metal Prep
is an inexpensive insurance policy that
guarantees
perfect adhesion of POR-15
®
Rust Preventive Coating to any metallic surface
every time
. Whether you paint your car or your fence or your outdoor furniture, the problems are always the same, because you dont know anything about the steel youre painting or what mill it came from, and you cant learn anything by just looking at it even if you have perfect vision!
Formerly PREP & READY
POR-15 recommends after opening up a can, place the unused portion of the can to be stored in a plastic container. The cans from POR-15 are air tight and once opened, you will damage the lid and/or can.
As soon as air enters into the can, it will cause the paint to cure, making reopening of the can with the lid difficult. After opening the paint, any paint on or around the edges of the lid will weld the can closed.
All Images Used In POR-15 Listings Are For Reference Only & May Not Show The Actual Item Being Purchased.  Please Check Listing Details For The Item Specifics Prior To Purchasing.
Per California Law (Prop 65) we are required to put the following warning on all our listings.
WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Payment:  To keep things simple we only accept PayPal on eBay.  ALL ILLINOIS RESIDENTS MUST PAY 8% SALES TAX REGARDLESS IF ITEM IS SHIPPING OR BEING PICKED UP.
Fitment: Please verify that the description contains your specific vehicle. While eBay’s compatibility system does a good job, it sometimes lists sub-models that may or may not be compatible with the part being offered.
Questions or Concerns: Please do not contact our retail store, as our retail customer service representatives do not service eBay customers. All communication regarding eBay items must be addressed through eBay messaging only. We will reply to your email within 24 hours dependent on the time and day of the week.
Shipping: Some or all packages may require signature at time of delivery.  We will only ship to addresses provided by eBay at the time of purchase unless a change request is made.  Requests to change address must be made using eBay’s message system. We will do our best to follow your request.  While in most instances we should be able to change an address for you, there may be an instance in where the order is to far along to change it.
Truck Freight Shipping: All items shipped via truck freight require signature upon delivery. Please inspect all deliveries prior to signing for your delivery.  Once the order is signed for you are responsible for dealing with the freight company in regards to any damage discovered later.
Drop Shipping: We have a 70,000 square ware house; so chances are we do have your item in stock and ready to go. There are instances where the item ships manufacturer direct; this may include but not limited to: radiators, fuel and brake lines, wiring harnesses, carpets and interior items. There are other instances where we occasionally run out of stock and drop ship a part to speed up the process. Sorry for any inconvenience.
Multiple Purchases: Please use eBay's cart system at checkout to combine all of your purchases from The Parts Place Inc.  If your purchases qualify for a shipping discount, your PayPal account will be credited with the difference.  Terms and conditions of shipping discount vary due to part sizes, quantity, and value.
Returns: We offer a 30 day return policy.  Any item can be returned in the same condition it was received, within 30 days for a refund minus a 20% restocking fee. This excludes special order items and electrical items. Please use the eBay messaging system to see if your item is returnable and to set up the return. Buyer is responsible for return shipping.
Powered by SixBit's eCommerce Solution